Huawei S1700 Series - Binding Table Information

S1700 Managed Series Ethernet Switches
Web User Manual
9 Security
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
153
Step 5 Click Apply button to apply the changes made.
----End
CAUTION
DHCP Snooping function of the interface, DHCP rate limit, request packet check and Chaddr
check can not be enabled on trunk member port.
9.8.5 Binding Table Information
Click Security> DHCP Snooping> Binding Table Information to view the binding information
on switch, the configuration page is displayed as follows.
Figure 9-40 Binding Table Information
Table 9-27 Parameters of Binding Table Information
Item
Description
Interface Name
Interface number belongs to host.
VLAN ID
VLAN ID belongs to host.
IP Address
Host IP address.
MAC Address
Host MAC address.
Lease Time
Host IP address lease time.
Import binding table.
Step 1 Click Security> DHCP Snooping.
Step 2 Click Binding Table Information in Tab.
Step 3 Click the Browse button and select the file from local PC which contains the binding table
information. Click the Import button to load the information to the switch.
----End
Export binding table.