Huawei S1700 Series - Dynamic ARP; Ipv6 Neighbor; Static Neighbor

S1700 Managed Series Ethernet Switches
Web User Manual
3 System Management
S1700 Managed Serie s Etherne t Switches
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
3.8.2 Dynamic ARP
Click System Management > ARP > Dynamic ARP page to display the switch detected
dynamic ARP entries and set the aging time for ARP cache entries, the configuration page is
shown as the figure below.
Figure 3-13 Dynamic ARP
Table 3-12 Parameters of Dynamic ARP
Item
Description
Aging Time
Set the aging time for dynamic entries in the ARP table.
(Range: 0-65535 minutes; Default: 20 minutes) The ARP
aging timeout can only be set globally for all VLANs.
Interface Name
Name of the interface.
IP Address
Dynamically detected IP address.
MAC Address
Dynamically detected MAC address.
Dynamic ARP Aging Time Configuration
Step 1 Click System Management > ARP> Dynamic ARP.
Step 2 Set aging time in Aging Time field for ARP.
Step 3 Click Apply to apply all the changes made.
----End
3.9 IPv6 Neighbor
3.9.1 Static Neighbor
Click System Management > IPv6 Neighbor > Static Neighbor page to display and add IPv6
static neighborhood information, the configuration page is shown as the figure below.