Huawei S1700 Series - Dynamic Neighbor

S1700 Managed Series Ethernet Switches
Web User Manual
3 System Management
S1700 Managed Serie s Etherne t Switches
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
Figure 3-14 Static Neighbor
Table 3-13 Parameters of Static Neighbor
Item
Description
Neighbor Address
IPv6 address of neighbor.
Link Address
MAC address of neighbor.
Interface Name
Name of the interface.
Status
Display the status of IPv6 neighbor address.
Static Neighbor Table Configuration
Step 1 Click System Management > IPv6 Neighbor > Static Neighbor.
Step 2 Click New button to add new static neighborhood information, as shown in following figure.
Figure 3-15 Edit Static Neighbor
Step 3 Enter relevant static neighborhood information.
Step 4 Click Apply to apply all the changes made.
----End
3.9.2 Dynamic Neighbor
Click System Management > IPv6 Neighbor > Dynamic Neighbor page to display the IPv6
dynamic neighbor information detected by switch, the configuration page is shown as the
figure below.