S1700 Managed Series Ethernet Switches
Web User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Interface that corresponds to the above MAC address.
Click this button to modify MAC address.
Click this button to add a static MAC address entry.
Click this button to delete static MAC address entry that
is selected from the address table.
Click this button to delete all the static MAC addresses
from address table.
Add a Static MAC Address
Step 1 Click New button to add a static MAC address, the configuration page is shown as the figure
below.
Figure 5-20 Add Static MAC Address
Step 2 Enter the static MAC address information to be added in configuration page.
Step 3 Click Apply button to apply all the changes made.
----End
5.4.4 Blackhole MAC Table
Click Service Management > MAC > Blackhole MAC Table page to open the page as shown
in following figure, which displays the information of Blackhole address table on switch.