Huawei S1700 Series - Interface

S1700 Managed Series Ethernet Switches
Web User Manual
9 Security
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
159
Table 9-31 Parameters of Global Settings
Item
Description
Auto Recovery
The un-trusted interface can be reset to enabled status
when un-trusted interface is closed for ARP message over
speed.
Automatic Recovery Interval
Enter the automatic recovery time. Values range from 30
to 86400 seconds, the default is 300 seconds.
Manual Recovery
Click Apply button to restore the closed interface
manually.
Query
Search DAI status information of specified VLAN in
VLAN ID.
VLAN ID
VLAN ID number
Status
DAI configuration status on VLAN
Enable DAI of VLAN
Step 1 Click Security> DAI.
Step 2 Click Global Parameter in Tab.
Step 3 Click the checkbox on the left side of VLAN of DAI function to be enabled, and then click
Configure button, the configuration page is displayed as follows.
Figure 9-47 Enable VLAN DAI
Step 4 Enable DAI status of VLAN in Status field.
Step 5 Click Apply button to apply the changes made.
----End
9.10.2 Interface
Click Security> DAI> Interface, the configuration page is displayed as follows.