Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Rules for filtering information: serverity code of deny information is higher than the
information outputting of the threshold.
1. Set 0 as the value of severity level, the system will only output emergencies information.
2. Set 7 as the value of severity level, the system will output all the information.
11.4.2 Log Information
View the system log in Log Information page according to the requirements.
Click Device Management> Information Center > Log Information, the configuration page is
displayed as follows.
Figure 11-7 Log Information
Table 11-5 Parameters of Log Information