Huawei S1700 Series - Interface

S1700 Managed Series Ethernet Switches
Web User Manual
10 Network
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
204
Item
Description
Asset ID
The switch asset identifier which is used for directory
managing and asset tracking.
10.4.2 Interface
Click Network > LLDP -MED> Interface, the configuration page is displayed as follows.
Figure 10-39 Interface
Table 10-23 Parameters of Interface
Item
Description
Query
Search the LLDP-MED information of specified interface
in Interface Name.
Interface Name
Interface number
Topology Change
Notification Status
Whether to change the topology of notification interface.
LLDP-MED Capability TLV
LLDP-MED TLV type that supported by switch.
LLDP-MED Network Policy
TLV
The VLAN type, VLAN ID, and the priority that associated
with L2 and L3 applications of the switch interface.
LLDP-MED Inventory TLV
The switch inventory information, such as the hardware
version, software version, serial number, etc.
Configure parameters of interface
Step 1 Click Network > LLDP-MED.
Step 2 Click Interface in tab.
Step 3 Click the check box on the left side of the interface which is to configure basic parameters,
and then click Configure to open the following page.