Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
To globally enable SNMP Trap function and Trap status on interface 1
Step 1 Click Network > SNMP.
Step 2 Click SNMP Trap Settings in Tab.
Step 3 Enable SNMP Trap function.
Step 4 Select the check box at the left side of interface 1, and click Configure, the configuration page
is displayed as follows.
Figure 10-13 Configure SNMP Link Change Trap
Step 5 Select Enable from Status list.
Step 6 Click Apply button to apply all the changes made.
----End
10.2 RMON
RMON (Remote Monitoring) is the monitoring specification of IETF (Internet Engineering
Task Force, Internet Engineering Task Force) standard, which allows various network
monitors and console systems to exchange network-monitoring data. RMON probes placed on
the network nodes. The network management platform decides what information will be
reported by these detectors, such as the monitored statistics, and the time of collecting
historical information,etc.. For example, switches and routers and other network devices that
act as a network node on the network are able to monitor the current node location through the
function of RMON.
To Next Page
Loading...
