Huawei S1700 Series - One Key Bind

S1700 Managed Series Ethernet Switches
Web User Manual
9 Security
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
157
Create a Static Binding Table Entry
Step 1 Click Security> IPSG
Step 2 Click Static Binding Table in Tab.
Step 3 Click New button to add a new binding table entry.
Figure 9-44 New Binding Table
Step 4 Enter relative information of static binding table in the page.
Step 5 Click Apply button to apply the changes made.
----End
9.9.3 One Key Bind
One Key Bind is used to add IPSG binding entry in ARP table on switch.
Click Security> IPSG> One Key Bind, the configuration page is displayed as follows.
Figure 9-45 One Key Bind
Table 9-30 Parameters of One Key Bind
Item
Description
Interface Name
Interface Number
VLAN ID
Host VLAN ID
MAC Address
Host MAC address
IP Address
Host IP address
Bind State
Whether to bind it as IPSG binding entry
Bind Settings
Click this button, bind/unbind the entry to IPSG binding table.