Huawei S1700 Series - Traffic Behavior

S1700 Managed Series Ethernet Switches
Web User Manual
7 QoS Configuration
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109
Item
Description
Match Priority
Match messages of the specified priority in VLAN
802.1p.
Match VLAN
Match messages of the specified VLAN in VLAN ID.
Match MAC Address
Match messages of the specified MAC address in source
MAC Address/mask.
Match Ethernet
Match Ethernet messages of the specified type in Ethernet
type.
Match ACL
Match messages specified in ACL number/ ACL name.
Step 3 Select the mode matched by traffic classifier to message.
Step 4 Click Apply button to apply all the changes made.
----End
7.8.2 Traffic Behavior
Click QoS>Traffic Management > Traffic Behavior to view traffic behavior configured on
switch; the configuration figure is shown as below.
Figure 7-16 Traffic Behavior
Table 7-12 Parameters of Traffic Behavior
Item
Description
Behavior Name
Behavior profile name
Action
Action executed by this behavior.
Add a Traffic Behavior
Step 1 Click QoS>Traffic Management> Traffic Behavior.
Step 2 Click New button to add a traffic behavior, opening the configuration page shown as the
figure below.