Huawei S1700 Series - Page 118

S1700 Managed Series Ethernet Switches
Web User Manual
7 QoS Configuration
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
Add a Rule for Traffic Classifier
Step 1 Click QoS>Traffic Management >Traffic Classifier.
Step 2 Click Apply button to add a traffic classifier, opening the configuration page shown as the
figure below.
Figure 7-14 Add Traffic Classifier
Step 3 Enter a name for traffic classifier in Traffic Classifier Name bar.
Step 4 Click Apply button to apply all the changes made. The successfully created traffic classifier
will be displayed in list of traffic classifier.
----End
Add a Rule for Traffic Classifier
Step 1 Click QoS>Traffic Management >Traffic Classifier.
Step 2 In list of traffic classifier click the traffic classifier to be added rule and click New button in
rule list box, opening the configuration page shown as the figure below.
Figure 7-15 Add Rules for Traffic Classifier
Table 7-11 Parameters of Adding Traffic Classifier Rules
Item
Description
Traffic Classifier Name
Classifier profile name.
Match All Packets
Match all packets.