Huawei S1700 Series - Interface Trust Settings

S1700 Managed Series Ethernet Switches
Web User Manual
9 Security
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
150
Enable DHCP Snooping for Interface
Step 1 Click Security> DHCP Snooping.
Step 2 Click Interface State Configure in Tab.
Step 3 Click checkbox on the left side of DHCP Snooping to be enabled, and then click Configure
button, the configuration page is displayed as follows.
Figure 9-35 Interface State Settings
Step 4 Select Enable in Status bar.
Step 5 Click Apply to apply the changes made.
----End
9.8.3 Interface Trust Settings
Click Security> DHCP Snooping> Interface Trust Settings, the configuration page is
displayed as follows.
Figure 9-36 Interface Trust Settings
Table 9-25 Parameters of Interface Trust Settings
Item
Description
Query
Search the state settings of specified interface in Interface Name.
Interface Name
Interface Number.
Status
The trust status of Interface. The switch only processes the DHCP
message from trusted DHCP Server interface and then generates a
dynamic host binding entry.