Huawei S1700 Series - Page 194

S1700 Managed Series Ethernet Switches
Web User Manual
10 Network
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
184
Item
Description
Priv Protocol
The encryption protocol, which can be set as DES (DES 56-bit
encryption based CBC-DES (DES-56) standard), or does not use any
encryption protocol.
ACL
Specify the binding ACL ID. If not specified, which means it is not
controlled by ACL.
Create a new SNMP User
Step 1 Click Network>SNMP.
Step 2 Click SNMP User in Tab, and click New to add a SNMP User, the configuration page is
displayed as follows.
Figure 10-11 Create a SNMP User
Table 10-7 Parameters of Creating a SNMP User
Item
Description
User Name
User name, up to 32 characters, is used to identify the SNMP user.
Group Name
The SNMP group name that the user belongs to.
SNMP Version
Specify SNMPv3 that will be used.
SNMP V3 Encryption
None: Indicates do not use the authentication protocol.
Password: Usie password for authentication and encryption.
Password
Authentication algorithm: Select the authentication protocol,
which can be MD5 (using HMAC-MD5-96 Authentication
Protocol) or SHA (HMAC-SHA authentication protocol to use).
Encryption algorithm: Select the encryption protocol, which can
be set as DES (DES 56-bit encryption based CBC-DES
(DES-56-bit) standard), or does not use any encryption protocol.
ACL
Specify the binding ACL ID. If not specified, which means it is
not controlled by ACL.
Step 3 Enter the user name to be created in User Name field, such as "user1".