Huawei S1700 Series - Page 208

S1700 Managed Series Ethernet Switches
Web User Manual
10 Network
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
198
Figure 10-30 Dot1 TLVs
Table 10-17 Parameters of Dot1 TLVs
Item
Description
Query
Search the Dot1 TLVs settings of specified interface in Interface
Name.
Interface Name
Interface number
PVID State
Whether to publish PVID of the interface (Port VLAN ID).
VLAN Name State
Whether to publish the VLAN name on interface.
VID
VLAN ID of the interface
Protocol Identity State
Whether to publish the protocol identifier state of interface
Protocol Identity
The protocol accessed through this interface.
Configure parameters of Dot1 TLVs for interface
Step 1 Click Network > LLDP.
Step 2 Click Dot1 TLVs in tab.
Step 3 Click the check box on the left side of the configuring Dot1 TLVs parameter interface, and
then click Configure to open the following page.
Figure 10-31 Configure Dot1 TLVs parameter
Step 4 Enable to publish the relevant parameter.