Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configure Traffic Shaping for Interface
Step 1 Click QoS >Traffic Shaping.
Step 2 Click the checkbox on the left of the interface to be configured traffic shaping, and click
Configure button, opening the configuration page shown as the figure below.
Figure 7-23 Traffic Shaping Configuration
Step 3 Cancel checkbox of Unlimited on the right of queue, and enter the speed rate range of queue
in Minimum Rate/Maximum Rate bar.
Step 4 Click Apply button to apply all the changes made.
----End
To Next Page
Loading...
