Huawei S1700 Series - Page 179

S1700 Managed Series Ethernet Switches
Web User Manual
9 Security
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
169
Figure 9-58 RADIUS Global Settings
Table 9-39 Parameters of RADIUS Global Settings
Item
Description
RADIUS-server Retransmit
This value is the number of requests sent by the switch when
there is no response in authentication server. Values range
from 1 to 5. Default is 3.
RADIUS-server Timeout
Enter the time (in seconds) for which the switch will wait the
server host to response certificate request. Values range
from 3 to 10. Default is 5.
RADIUS-server Key
Enter the key of RADIUS server. Values range from 1 to 16.
Confirm Key
Re-enter the key of RADIUS to ensure no error. If the two
domains do not match, the switch will not modify the key.
Values range from 1 to 16
NAS-Port-ID Format
NAS-Port-ID format is extended attributes within Huawei
and is used among Huawei devices for interoperability and
business cooperation. NAS-Port-ID has the new and old in
two forms. Depending on different configuration format,
there will be different forms of physical port where accessed
user exists.
New Format: "slot = XX; subslot = XX; port = XXX;
VLANID = XXXX;". Slot range: 0 ~ 15, Subslot range: 0 ~
15, Port range: 0 ~ 255, VLANID range: 1 ~ 4094.
Old Format: port number (two characters) + sub-slot number
(two bytes) + card (three bytes) + VLANID (9 characters).
NAS-Port Format
NAS-Port-ID format is extended attributes within Huawei
and is used among Huawei devices for interoperability and
business cooperation. NAS-Port has the new and old in two
forms. Depending on different configuration format, there
will be different forms of physical port where accessed user
exists.
New Format: slot number (8) + sub-slot number (4) + port
number (8) + VLAN ID (12 bits).
Old Format: slot number (12) + port number (8) + VLAN ID
(12 bits).