Huawei S1700 Series - Page 37

S1700 Managed Series Ethernet Switches
Web User Manual
4 Interface Management
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27
Item
Description
Flow Control
Configuration
Check if the flow control is enabled or disabled on the
interface.
Flow Control Status
Check whether the flow control is effective or not.
Link Status
Display the operating speed and duplex mode of the interface.
Speed Set
Display the current speed configuration on the interface.
Duplex Set
Display the current duplex configuration on the interface.
Negotiation
Display if the automatic negotiation is enabled or disabled.
Input Rate Limit
Input rate limit on interface.
Output Rate Limit
Output rate limit on interface.
Jumbo Frame
Size of Jumbo frame on interface.
Description
Description about the interface.
Interface Attribute Configuration
Step 1 Click Interface Management > Ethernet Interface > Basic Attributes.
Step 2 Choose the check box in the left-hand column of the interface to be configured with attributes
from the list, and then click Configure button to manually configure status for the designated
interface, including negotiation, interface speed, duplex mode and flow control, the
configuration page is shown as the figure below.
Figure 4-2 Basic Attributes Configuration