S1700 Managed Series Ethernet Switches
Web User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Apply the ACL number on the interface. The switch will use this
ACL rule to deal with multicast message when receiving it.
Create an IGMP Group Policy
Step 1 Click Service Management> IGMP Snooping> Group Policy.
Step 2 Click New button to open the configuration page shown as the figure below.
Figure 5-40 Add Group Policy
Table 5-27 Parameters of IGMP Snooping Group Policy
Specify VLAN for transmitting multicast service ; if no specified
interface or Eth-Trunk, this configuration is multicast policy based
on VLAN ; otherwise, the multicast policy based on interface.
When applying the ACL number on interface, regardless of
configuring VLAN multicast policy or configuring interface's
multicast policy, only one ACL rule can be configured.
Step 3 Configure the needed parameter.
Step 4 Click Apply button to apply all the changes below.
----End
To Next Page
Loading...
