Hypertherm XPR170 Replacement Part Procedures

Plasma Power Supply
1
XPR170 Field Service Bulletin 810410 31
11 . Connect the power connector (J21) to the motor.
12. Install the liquid-cooling-side panel.
13. Install the coolant. Refer to the Coolant Installation section in the XPR170 Instruction Manual
(810060).
14. Use the XPR web interface to make sure that the coolant pump and motor assembly operates
correctly.

For more information on the XPR web interface, refer to the Connect for
Communication in the XPR170 Instruction Manual (810060).

Hypertherm XPR170 Specifications

General

Brand	Hypertherm
Model	XPR170
Category	Welding System
Language	English