The Status Menu
45
Alert Delivery Tab
Figure 30. Status Monitoring Properties:
Alert Delivery Tab â Alert Log Sub-Tab
Select Status
î
Properties to open the Status Monitoring Properties dialog
box. Click the Alert Delivery tab. Check the Enable Notification check box
to enable the option. The Alert Delivery properties allow you to customize the
way the PMU notifies you of potential printer errors. Descriptions of the three
alert types follows:
1. Alert Log: Allows the PMU to log alerts to a file located in the PMU
installation directory. To log alerts, check the Enable Log File check box,
then click Add (see Figure 30). A task item adds to the log list. In the task
item, specify the following as applicable, then click Apply or OK.
Log File: To name the log file. The default file name is alerts.log.
Size: To set the maximum file size, in bytes. The default (and
minimum required) size is 1000 bytes.
Device: To choose a device item you want the PMU to monitor, such
as a folder, specific printer, or a range of IP addresses.
First: To set the beginning IP address in a polling range. Use this
option if you select Range: as the Device option.
Last: To set the last IP address in a polling range. Use this option if
you select Range: as the Device option.
To Next Page
Loading...
Need help?
General
