IBM N51 Series User Manual

Power Management Features
Press Func+F3 to select Power Management setup (any
time after the computer is powered-on).
Important
Before using the power saving features, be sure to
read and observe the following precautions:
 If you enter Suspend or Hibernate mode with a
diskette inserted in the diskette drive, the same
diskette must be installed in the drive before
attempting to resume normal operation.
 If you enter Suspend or Hibernate mode with a
PCMCIA card inserted in the PCMCIA slot, the
same PCMCIA card must be installed in the slot
before attempting to resume normal operation.
Hibernate mode does not save/restore the status
of PCMCIA cards. When you resume normal
operation from Hibernate mode, the PCMCIA
card is no longer configured and will not be
recognized by the computer.
 If the computer is connected to a Local Area
Network (LAN) that periodically polls for station
activity, the LAN-connection might be terminated
while the computer is in Suspend or Hibernate
mode. Any further attempt to access the network
results in a brief delay and the computer appears
to hang (up to 1 minute, depending on the
network). After the delay, an error is displayed.
Follow the instructions on the screen to restore
normal operation.
 Any software program that was running over the
LAN is not re-entered when you resume normal
operation from Hibernate or Suspend modes.
ThinkPad 510 (2604) 263

IBM N51 Series Specifications

General

Brand	IBM
Model	N51 Series
Category	Laptop
Language	English