Internal SCSI Device Connectors:
The SCSI device
connector is a 50-pin, SCSI interface connector which
transfers system data to and from the SCSI device. This
connector is for the cable of an internal SCSI device.
Power Supply
The power supply switches automatically to either the
100–125 V ac or the 200–240 V ac voltage range when
the power cord is plugged into a power outlet. The power
supply converts ac voltage to dc voltage to supply the
Dock II and the computer with the correct operating
voltages.
426 IBM Mobile Systems HMM - Volume 1
To Next Page
Loading...
Need help?
General