1040 LED Assembly
Bottom Cover (1010)
.1/ .2/ .3/
Note: When you install the LED assembly in the Dock I:
1. Put the edge of the LED assembly into the
groove.
2. Put the status indicators and headphone jack
into the each hole.
3. Hook the .4/ to the guide.
4. Reinstall the two screws.
1050 Buzzer
Bottom Cover (1010)
.5/ .6/ .7/
Step Color and type (quantity) Length
.1/ White self tapping for
plastics (2)
Diameter: 2 mm (0.08 in.)
8 mm (0.31 in.)
.6/ White screw (1) 5 mm (0.20 in.)
Note: Make sure you use the correct screw.
370 IBM Mobile Systems HMM - Volume 1
To Next Page
Loading...
Need help?
General