IBM N51 Series

If the external display does not meet these specifications,
replace the external display.
If the external display meets these specifications, replace
FRUs in the following order one at a time until the problem
is corrected.
Note: If the replaced parts did not resolve the problem,
put the original parts back in the Dock II. Do not
replace non-defective parts.
If the external display is attached to Dock II:
1. Main card of Dock II
2. External display
If the external display is attached to the display adapter:
1. Display adapter
2. Main card of Dock II
3. Riser card
4. External display
Dock II (3546)
403