IBM StorVize V7000 Gen2 User Manual

3. Use a cross head screwdriver to tighten the retaining screws that secure the
FIB to the drive board, as shown in Figure 85.
svc01031
Figure 84. Insert the new FIB in the chassis
svc01029
Figure 85. Secure the FIB to the drive board
Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware 91

IBM StorVize V7000 Gen2 Specifications

General

Category	Storage
Maximum Drives	504
RAID Levels	0, 1, 5, 6, 10
Operating System	IBM Spectrum Virtualize
Power Supply	Dual redundant power supplies
Input Voltage	100-240 V AC
Humidity	8% to 80% non-condensing
Model	Storwize V7000 Gen2
Drive Interface	SAS
Form Factor	2U
Drive Types Supported	SAS SSDs, SAS HDDs
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI
Nodes	2
Operating Temperature	10°C to 35°C
Non-operating Temperature	-10°C to 50°C