IBM StorVize V7000 Gen2 User Manual

3. Use the handle to pull the FIB out of the expansion enclosure chassis, as shown
in Figure 106.
svc01029
Figure 105. Loosen the FIB screws
svc01031
Figure 106. Remove the FIB from the chassis
Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware 115

IBM StorVize V7000 Gen2 Specifications

General

Category	Storage
Maximum Drives	504
RAID Levels	0, 1, 5, 6, 10
Operating System	IBM Spectrum Virtualize
Power Supply	Dual redundant power supplies
Input Voltage	100-240 V AC
Humidity	8% to 80% non-condensing
Model	Storwize V7000 Gen2
Drive Interface	SAS
Form Factor	2U
Drive Types Supported	SAS SSDs, SAS HDDs
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI
Nodes	2
Operating Temperature	10°C to 35°C
Non-operating Temperature	-10°C to 50°C