About this task
This task assumes that the following conditions were met:
v The expansion enclosure was moved out from the rack on the slide rails, as
described in “Removing an expansion enclosure from a rack: 2076-92F” on page
92
v The top cover was removed, as described in “Removing the top cover: 2076-92F”
on page 44.
v The display panel assembly was removed, as described in “Removing the
display panel assembly: 2076-92F” on page 118.
Procedure
1. Remove the display panel assembly, which is shown in Figure 110 on page 122,
from its packaging.
Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware 121
To Next Page
Loading...
Need help?
General