IBM System x3650 M4 Type 7915 - Page 112

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000006-00000000 Ethernet Duplex
setting modified from
%1 to %2 by user
%3.
(%1 =
CIM_EthernetPort.
NetworkAddresses;
%2 =
CIM_EthernetPort.
NetworkAddresses;
%3 = user ID)
Info A user has
modified the
Ethernet port MAC
address setting.
No action; information only.
40000007-00000000 Ethernet interface %1
by user %2.
(%1 =
CIM_EthernetPort.
EnabledState; %2 =
user ID)
Info A user has enabled
or disabled the
Ethernet interface.
No action; information only.
40000008-00000000 Hostname set to %1
by user %2.
(%1 =
CIM_DNSProtocolEndpoint.
Hostname; %2 = user
ID)
Info A user has
modified the host
name of the IMM.
No action; information only.
40000009-00000000 IP address of network
interface modified
from %1 to %2 by
user %3.
(%1 =
CIM_IPProtocolEndpoint.
IPv4Address; %2 =
CIM_Static
IPAssignment
SettingData.
IPAddress; %3 = user
ID)
Info A user has
modified the IP
address of the
IMM.
No action; information only.
4000000a-00000000 IP subnet mask of
network interface
modified from %1 to
%2 by user %3s.
(%1 =
CIM_IPProtocolEndpoint.
SubnetMask; %2 =
CIM_StaticIPAssignment
SettingData.
SubnetMask; %3 =
user ID)
Info A user has
modified the IP
subnet mask of the
IMM.
No action; information only.
94 IBM System x3650 M4 Type 7915: Problem Determination and Service Guide