EasyManuals Logo

IBM TS4300 User Manual

IBM TS4300
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
Parameter
Code Flag name Type Description
04d Library
Hardware D
C The library has a hardware fault that is not mechanically related or
requires a power cycle to recover.
• Turn the media changer OFF, then ON.
• Restart the operation.
• If the problem persists, contact Technical Support.
05d Library
Diagnostics
Required
W The library mechanism might have a hardware fault.
Run extended diagnostics to verify and diagnose the problem. Check
the library user's manual for device-speciîš´c instructions on running
extended diagnostic tests.
13d Library Pick
Retry
W There is a potential problem with the drive ejecting cartridges or with the
library picking cartridges from a slot.
• No action needs to be taken at this time.
• If the problem persists, contact Technical Support.
14d Library Place
Retry
W There is a potential problem with the library mechanism placing a
cartridge into a slot.
• No action needs to be taken at this time.
• If the problem persists, contact Technical Support.
15d Library Load
Retry
W There is a potential problem with the drive or the library mechanism
loading cartridges, or an incompatible cartridge.
This flag is cleared when the next move command is received.
16d Library Door C The operation failed because the library door is open.
• Clear any obstructions from the library door.
• Close the library door.
• If the problem persists, call the library supplier help line.
17d Library I/O
Station
C There is a mechanical problem with the library media I/O Station.
19d Library
Security
W Library security is compromised. The door was opened then closed
during operation.
20d Library
Security
Mode
I The library security mode was changed. The library was either put
into secure mode, or the library exited the secure mode. This is for
information purposes only. No action is required.
21d Library
Offline
I The library was manually turned offline and is unavailable for use.
22d Library Drive
Offline
I A drive inside the library was taken offline. This is for information
purposes only. No action is required.
IBM Conîš´dential
Chapter 5. Troubleshooting139

Table of Contents

Other manuals for IBM TS4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM TS4300 and is the answer not in the manual?

IBM TS4300 Specifications

General IconGeneral
Product TypeTape Library
Form FactorRack-mountable
Host Interface8 Gb Fibre Channel, 6 Gb SAS
Humidity20% to 80% non-condensing
Number of Drives SupportedUp to 3
Drive Type SupportedLTO Ultrium 8, LTO Ultrium 7
EncryptionYes
Remote ManagementYes (web-based interface)
Supported MediaLTO Ultrium 8, LTO Ultrium 7
Power Supply100-240 VAC, 50/60 Hz

Related product manuals