Icom IC-7600

■ Playing the recorded audio
D Basic playing
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Push [VOICE] (F-2) to call up the voice recorder
screen.
• Previously selected screen, TX or RX memory,
is displayed. If the TX memory message (T1–T4)
appears, push [T/R] (F-6) to select RX memory
message.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
voice memory to playback.
r Push [PLAY] (F-3) to start playback.
• “ ” indicators appear and the timer counts
down.
t Push [PLAY] (F-3) again to stop playback if
desired.
• Playback is terminated automatically when all of the
recorded contents in the message are played.
y Push [EXIT/SET] twice to exit the voice recorder
screen.
D One-touch playing
The previously recorded audio in message 1 can be
played back without selecting voice recorder screen.
➥ Push [PLAY] momentarily to playback the last
5 seconds of the previously recorded audio.
• To playback all contents of the previously recorded
audio, hold down [PLAY] for 1 second.
• “
” indicator appears.
• Playback is terminated automatically when all of the
recorded contents in the message are played, or after
5 seconds.
• The playback time period can be set in the voice set
mode. (p. 105)
100
5
VOICE RECORDER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
F-2
F-3
F-1
PLAY
EXIT/SET
T/R
F-6
VOICE
/
Appears
Appears
Counts down
PLAY