Icom IC-7600

■ Memory names
All memory channels (including scan edges) can
be tagged with alphanumeric names of up to 10
characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } ¦ _
–
@)
and space can be used.
D Editing (programming) memory names
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Push [MEMORY] (F-4) to select memory list screen.
e Select the desired memory channel with [∫]/[√].
r Push [NAME] (F-4) to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
t Input the desired character by rotating the main
dial or by pushing the keypad for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and
symbols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to input a space.
• Pushing the transceiver’s keypad, [0]–[9] and [.] can
also enter numerals.
y Push [EXIT/SET] to input and set the name.
• The cursor disappears.
u Repeat steps e to y to program another memory
channel’s name, if desired.
i Push [EXIT/SET] to exit memory list screen.
For your convenience ✓
When a PC keyboard is connected to a [USB] (A)
connector on the front panel, the memory name can
also be edited from the keyboard.
■ Memory clearing
Any unused memory channels can be cleared.
The cleared memory channels become blank
channels.
q Select memory mode with [VFO/MEMO].
w Push [MEMORY] (F-4) to select memory list
screen.
e Select the desired memory channel with [∫]/[√].
r Hold down [CLR] (F-5) for 1 second to clear the
contents.
• The programmed frequency, operating mode and lter
disappear.
t To clear other memory channels, repeat steps e
and r.
111
6
MEMORY OPERATION
F-1 F-2 F-4F-3
DEL SPACE
F-4
EXIT/SET
Main dial
Symbol ABC
123 abc
Keypad
MEMORY
NAME
F-5F-4
CLR
VFO/MEMO
MEMORY
Push for 1 sec.
Beep
Beep
Beep
(CLR)
F-5