Icom IC-7600

The following screens can be selected from the start-
up screen. Choose the desired screen using the fol-
lowing chart.
Pushing [EXIT/SET] several times returns to the start-
up screen. See page 127 for set mode arrangement.
• Spectrum scope screen (p. 69)
• Voice recorder screen* (p. 99)
• RTTY decoder screen (RTTY mode; p. 50)
• Memory keyer screen (CW mode; p. 44)
• Memory list screen (p. 108)
• PSK decoder screen (PSK mode; p. 58)
• Scan screen (VFO mode; p. 115)
• Scan screen (Memory mode; p. 117)
• Set mode menu screen (p. 126)
F-1 F-2 F-3 F-3
F-4
F-5F-2
F-5F-3
F-6F-3
F-4 F-5 F-6
*Previously selected screen, TX or RX memory, is displayed.
Push [T/R] (F-6) to switch the screen.
■ Screen menu arrangement
15
1
PANEL DESCRIPTION