Icom IC-7600

■ Setting select memory channels
118
7
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
EXIT/SET
F-3
F-5F-1 F-2
VFO/MEMO
SCAN
SELECT
F-4
MEMORY
ROLL SET
• Scan screen
• Memory list screen
F-5
SCAN
F-3
SELECT
F-1
F-2 F-3
★1★1 ★2 ★3
F-4
★1,2,3
F-4
MEMORY
EXIT/SET
D Setting in scan screen
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Select memory mode.
e Push [SCAN] (F-5) to select the scan screen.
r Select the desired memory channel to set as a
select memory channel.
• [∫]/[√] keys and direct keypad selections can be used.
(p. 107)
t Push [SELECT] (F-3) several times to set the
memory channel as a select memory ★1, ★2, ★3
or not.
• “★1,” “★2” or “★3” appears on the LCD to show that the
channel is specified as the select memory.
y Repeat steps r to t to program another memory
channel as a select memory channel.
u Push [EXIT/SET] to exit the scan screen.
D Setting in memory list screen
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Push [MEMORY] (F-4) to select memory list
screen.
e Rotate the main dial while pushing [ROLL] (F-1) or
[SET] (F-2) to select the desired memory channel.
• [∫]/[√] keys and direct keypad selections can be used.
(p. 107)
r Push [SELECT] (F-3) several times to set the
memory channel as a select memory ★1, ★2, ★3
or not.
• “★1,” “★2” or “★3” appears on the LCD to show that the
channel is specified as the select memory.
t Repeat steps e to r to program another memory
channel as a select memory channel.
y Push [EXIT/SET] to exit the memory list screen.
D Erasing the select scan setting
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Push [MEMORY] (F-4) to select memory list
screen, or push [SCAN] (F-5) to select scan
screen.
e Hold down [SELECT] (F-3) for 1 second to display
memory select all clear window.
r Push one of the following keys to clear all select
scan settings.
[★1] (F-1) : Clears all ★1 settings.
[★2] (F-2) : Clears all ★2 settings.
[★3] (F-3) : Clears all ★3 settings.
[★1,2,3] (F-4) : Clears all select settings.
t Push [EXIT/SET] to exit the memory list screen.