Icom IC-7600

39
3
BASIC OPERATION
D Meter type selection
A total of 3 meter types are available in the IC-7600—
Standard, Edgewise and Bar meters.
Follow the instructions below for the meter type
selection.
q Push [EXIT/SET] several times to return to the
normal screen, if necessary.
w Push [SET] (F-6), then push [DISP] (F-3) to select
the display set mode.
e Push [Y] (F-1) or [Z] (F-2) to select “Meter type
(Normal Screen)” item.
r Rotate the main dial to select the desired meter
type between “Standard,” “Edgewise” and “Bar.”
t Push [EXIT/SET] to exit the display set mode.
■ Voice synthesizer operation
The IC-7600 has a built-in voice synthesizer to
announce the operating frequency, mode* and
S-meter* in clear, electronically-generated voice, in
English (or Japanese).
First, select the desired parameters to be announced,
such as audio level, speed, language, contents, in the
Others set mode. (p. 139)
➥ Push [SPEECH/LOCK] to announce the currently
selected frequency, mode* and S-meter level*.
➥ Push a mode switch to announce the appropriate
mode*.
* The S-meter level and operating mode announcements
can be deactivated, respectively. (p.139)
NOTE: When “LOCK/SPEECH” is selected in
[[SPEECH/LOCK] Switch] item in the Others set
mode, holding down [SPEECH/LOCK] activates
the voice synthesizer. (p. 139)
• Standard meter
• Edgewise meter
• Bar meter
SPEECH
LOCK
Main dial
F-1 F-2
F-6
EXIT/SET
SET
F-3
DISP