EasyManua.ls Logo

Icom IC-7600

Icom IC-7600
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Select a phone mode by pushing [SSB] or
[AM/FM].
e Push [VOICE] (F-2) to call up the voice recorder
screen.
If the receive voice message appears, push [T/R] (F-6)
to select TX message (T1–T4).
r Push the desired message switch, [T1] (F-1) to
[T4] (F-4), momentarily to transmit the contents.
• The transceiver transmits automatically.
” indicator appears and the memory timer
counts down.
You hear the transmitted message from the speaker
as the default. This can be turned OFF in the voice set
mode. (p. 105)
t Push the selected message switch, [T1] (F-1) to
[T4] (F-4), again to stop, if desired.
The transceiver returns to receive automatically
when all of the recorded contents in the message are
transmitted.
y Push [EXIT/SET] twice to exit the voice memory
screen.
For your information
When an external keypad is connected to [MIC]
connector on the front panel, or one of [F1]−[F4] key
of the keyboard that is connected to the [USB] (A)
connector on the front panel is pushed,
the recorded
message, T1–T4, can be transmitted without
opening the voice recorder screen.
See pages 18, 141, 142 for details.
D Transmit level setting
q Call up the voice recorder screen as described
above.
w Push [TX LEV.] (F-5) to select the voice memory
transmit level set condition.
e Push the desired message switch, [T1] (F-1) to
[T4] (F-4), momentarily to transmit the contents.
• The transceiver transmits automatically.
” indicator appears and the memory timer
counts down.
r Rotate the main dial to adjust the transmit voice
level.
Hold down [DEF] (F-6) for 1 second to select the
default condition.
t Push [EXIT/SET] to return to the voice recorder
screen.
104
5
VOICE RECORDER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
F-1 F-2 F-4F-3
F-2
F-6
EXIT/SET
T3
T/RT4T2T1
SSB
AM/FM
VOICE
Appears Counts down
F-1 F-2 F-4F-3
T3
T4T2T1
F-5
F-6
EXIT/SET
Main dial
TX LEV.
DEF
Appears
Adjust the transmit voice level
from 0 to 100 %.
Sending a recorded message

Table of Contents

Other manuals for Icom IC-7600

Related product manuals