79
4
RECEIVE AND TRANSMIT
D USB mouse operation
If you connect a USB mouse to the transceiver,
a mouse pointer appears on the spectrum scope
screen.
Now, you can change the frequency by using the
mouse.
Clicking while holding down [XFC] changes the
transmit frequency.
• Mouse operation on the center mode screen
Button Operation Description
Left
Click
The frequency changes to the
clicked point and the mouse
pointer moves to the center of
the screen.
Drag
The frequency changes to
the clicked point and the
mouse pointer moves to the
center of the screen, and then
the frequency increases or
decreases.
Right Click/Drag
The right button temporarily
changes the frequency.
While holding the button,
same action as the left button,
but release it to return to the
original frequency.
• Mouse operation on the xed mode screen
Button Operation Description
Left
Click
The frequency and marker
change to the clicked point
Drag
The frequency and marker
change to the clicked point
and then the frequency
increases or decreases.
Right Click/Drag
The right button temporarily
changes the frequency.
While holding the button,
same action as the left button,
but release it to return to the
original frequency.
Changing frequencies in the drag operation differ,
depending on the tuning step settings.
To Next Page
Loading...
