Icom IC-7600

81
4
RECEIVE AND TRANSMIT
■ RIT function
The RIT (Receive Increment Tuning) function
compensates for off-frequency operation of the
received station.
The function shifts the receive frequency up to ±9.999
kHz in 1 Hz steps (10 Hz steps when cancelling
the 1 Hz step readout) without moving the transmit
frequency.
q Push [RIT] to turn the RIT function ON and OFF.
• “ ” and the shifting frequency appear when the
function is ON.
w Rotate the [RIT/∂TX] control.
• Hold down [CLEAR] for 1 second to reset the RIT
frequency.
• Push [CLEAR] momentarily to reset the RIT frequency
when the quick RIT/
∂TX clear function is ON. (p. 140)
• Hold down [RIT] for 1 second to add the shift frequency
to the operating frequency.
D RIT monitor function
When the RIT function is ON, holding down [XFC]
allows you to monitor the operating frequency directly
(RIT is temporarily cancelled).
For your convenience— Calculate function ✓
The frequency shift of the RIT function can be added/
subtracted to the displayed frequency.
➥ While displaying the RIT shift frequency, hold down
[RIT] for 1 second.
[RIT/∂TX]
CLEAR
RIT
RIT shifting frequency
XFC