Icom IC-7600

28
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Selecting VFO/memory mode
➥ Push [VFO/MEMO] to switch between VFO and
memory modes.
• “VFO” appears when in VFO mode, or the selected
memory channel number appears when in memory
mode.
• Holding down [VFO/MEMO] for 1 second transfers
the contents of the selected memory channel to VFO
mode. (p. 110)
CHANGE
Access to SUB band
MAIN band SUB band
Access to MAIN band
MAIN band SUB band
MAIN
/SUB
M.SCOPE
M.SCOPE
“VFO” indicator Memory channel number
VFO/MEMO
■ Main/Sub band selection
The IC-7600 has a main and a sub band.
The main band is displayed on the left hand side, and
the sub band is displayed on the right hand side of
the LCD. Some functions can only be applied to the
selected band, and transmission occurs on only the
main band (except during split frequency operation).
➥ Push [MAIN/SUB M.SCOPE] to select access to
the main or sub band readout.
• The selected readout frequency is displayed clearly.
The sub readout functions only during split operation or
dualwatch.
D Main/Sub band switching
➥ Push [CHANGE] to switch the frequency and
selected memory channel between main and sub
readouts.
• Switches between transmit frequency and receive
frequency when the split frequency function is ON.
(p. 96)
D Main/Sub band equalization
➥ Hold down [CHANGE] for 1 second to equalizes
the sub band readout to the main band readout.