Icom IC-7600

174
14
UPDATING THE FIRMWARE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Preparation
D File downloading
Information ✓
The downloaded firmware data
(Example: 7600_110.dat) should be copied to the
USB-Memory (in the “IC-7600” folder) using an
available USB port (a USB hub may be required, user
supplied).
q Access the following URL.
http://www.icom.co.jp/world/index.html
w Click the [Support] button.
e Click the “Firmware Updates/Software Downloads”
link.
r Click the desired firmware file link in the IC-7600
group.
t Read “Regarding this Download Service” carefully,
and then click [Agree].
y Click [Save as] in the displayed File Download
dialog.
u Select the desired location where you want to save
the firmware, and then click [Save] in the displayed
File Download dialog.
• File download starts.
i After the download is completed, extract the file.
• The rmware and the rm utility are compressed in the
“zip” format.
• When updating the transceiver using the USB-Memory,
copy the extracted firmware to the IC-7600 folder.
Click
Click
Click