Icom IC-7600

■ Scan set mode
The scan speed and the scan resume condition can
be set using the scan set mode.
q Push [SCAN] (F-5) to select scan screen.
w Push [SET] (F-6) to select the scan set mode.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
item.
r Rotate the main dial to select the desired condition.
• Hold down [DEF] (F-4) for 1 second to select the
default setting.
t Push [EXIT/SET] to return to scan menu.
Scan Speed HIGH
Select the desired scan speed between high and
low.
• HIGH : scan is faster.
• LOW : scan is slower.
Scan Resume ON
Set the scan resume function ON or OFF. • ON : When detecting a signal, scan pauses for
10 seconds, then resumes. When a signal
disappears, scan resumes 2 seconds later.
• OFF : When detecting a signal, cancels scanning.
114
7
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
F-1 F-2 F-4
EXIT/SET
Main dial
DEF
F-5
F-6
SETSCAN