■ LCD display
qtyuirew
o
!4
!3
!2
!1
e
w
!0
!6 !5
!2!3
!7
!5
!8
!0
!1
!9
@0 @2 @3@1
@4
q S/RF METER (pp. 38, 134)
Shows the signal strength while receiving. Shows
the relative output power, SWR, ALC, VD, ID or
compression levels while transmitting.
• A total of 3 meter types are available.
• Standard meter
• Edgewise meter
• Bar meter
w IF FILTER INDICATOR (p. 84)
Shows the selected IF filter number.
e QUICK TUNING INDICATOR (p. 32)
Appears when the quick tuning step function is in
use.
r BANDWIDTH INDICATOR (p. 83)
Shows the passband width of the IF filter.
t SHIFT FREQUENCY INDICATOR (p. 83)
Shows the shift frequency of the IF filter.
y PASSBAND WIDTH INDICATOR (p. 83)
Graphically displays the passband width for twin
PBT operation and the center frequency for IF shift
operation.
u BANDPASS FILTER INDICATOR
Appears when the narrow filter (500 Hz or less) is
selected during SSB, CW, RTTY or PSK operation.
i CLOCK READOUT
Shows the current time.
Local and UTC time can be displayed at the same
time.
• Offset time period for UTC time can be set in the time
set mode. (p. 123)
13
1
PANEL DESCRIPTION
To Next Page
Loading...
