Icom IC-7600

63
4
RECEIVE AND TRANSMIT
D PSK decode set mode
This set mode is used to set the PSK AFC range,
time stamp setting, etc.
• Setting contents
q During the PSK mode operation, push [DECODE]
(F-3) to select the PSK decode screen.
w Push [<MENU1>] (F-1) to select the second PSK
decode menu, then push [SET] (F-5) to select the
PSK decode set mode.
• Push [WIDE] (F-6) to toggle the screen size between
normal and wide.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
set item.
r Set the desired condition using the main dial.
• Hold down [DEF] (F-4) for 1 second to select a default
condition or value.
• Push [Ω ≈] (F-3) to select the set contents for
some items.
t Push [EXIT/SET] to exit from the set mode.
PSK FFT Scope Averaging OFF
Select the FFT scope waveform averaging function
from 2 to 4 and OFF. (default: OFF)
Recommendation!
If you use the FFT scope waveform for tuning,
using the default or smaller averaging setting is
recommended.
PSK FFT Scope Waveform Color 51 153 255
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is shown in the box beside the RGB
scale.
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
PSK AFC Range ±15Hz
Select the AFC (Automatic Frequency Control)
function operating range from ±15 Hz (default) and
±8 Hz.
NOTE: The AFC function may not tune the signal
properly when a weak PSK signal is received.
PSK Time Stamp ON
Turn the time stamp (date, transmission or reception
time) display ON or OFF.
• ON : Displays the time stamp.
• OFF : No time stamp display.
PSK Time Stamp (Time) Local
Selects the clock display for time stamp usage.
NOTE: The time won’t be displayed when “OFF”
is selected in “PSK Time Stamp” as shown
above.
• Local : Selects the time that set in “Time (Now).”
• UTC* : Selects the time that set in “CLOCK2.”
* The name of choice may differ according to
“CLOCK2 Name” setting (p. 123). “UTC” is
the default name of CLOCK2.
F-1 F-2 F-4F-3
DEF
EXIT/SETF-3
F-6
F-1
F-5
Main dial
DECODE
<MENU1>
SET
WIDE