Icom IC-7600

10
126
SET MODE
9
10
■ Set mode description
The set mode is used for programming infrequently
changed values or conditions of functions.
The IC-7600 has a level set mode, display set mode,
time set mode, accessory set mode, others set mode
and USB-Memory set menu.
D Set mode operation
q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Push [SET] (F-6) to select the set mode menu
screen.
• Holding down [EXIT/SET] for 1 second also selects the
set mode menu screen.
e Push [LEVEL] (F-1), [ACC] (F-2), [DISP] (F-3),
[TIME] (F-4), [OTHERS] (F-5) or [USB] (F-6) to
select the desired set mode.
r For level, accessory, display and Others set mode,
push [WIDE] (F-6) to toggle wide and normal
screen.
t Push [Y] (F-1) or [Z] (F-2) to select the desired
item, then rotate the main dial to adjust/select the
desired value or condition.
• Pushing [Ω ≈] (F-3) operation may be necessary for
some items.
• Hold down [DEF] (F-4) select a default condition or
value.
y Push [EXIT/SET] twice to exit the set mode.
F-1 F-2 F-3 F-4
F-5 F-6
LEVEL OTHERSTIMEDISPACC
EXIT/SET
USB
SET
F-6
• Set mode screen
F-1 F-2 F-3 F-4
F-6
Main dial
WIDE
DEF