9
123
CLOCK AND TIMERS
■ Clock set mode
The IC-7600 has a built-in calendar and 24-hour clock
(accuracy ±75 seconds per month) with daily power
ON/OFF timer functions. Before operating these timer
functions, set the current date and time.
q Push [EXIT/SET] several times to close multi-
function screen, if necessary.
w Push [SET] (F-6) to select the set mode menu
screen.
e Push [TIME] (F-4) to select the time set mode.
r Push [CLOCK] (F-1) to select the clock set mode.
t Push [Y] (F-1) or [Z] (F-2) to select the desired
item, then rotate the main dial to set or select the
desired value or condition.
• Pushing [Ω ≈] (F-3) may be necessary for some items.
• Hold down [DEF] (F-4) to select a default condition or
value.
y Push [EXIT/SET] to exit the time set mode.
Sets the date.
z
Push [Ω ≈] (F-3) to select between the year and the
month/day, then rotate the main dial to select them.
• The date setting and “DATE-set Push [SET]”
indicators blink.
x Push [SET] (F-5) to set the date.
Time (Now) 0:00
Sets the local time.
z Rotate the main dial to set the local time.
• The time setting and “TIME-set Push [SET]” indicators
blink.
x Push [SET] (F-5) to set the time.
CLOCK2 Function ON
Turns the CLOCK2 indicator ON and OFF.
CLOCK2 is convenient to display UTC or other
country’s local time, etc.
• ON : The CLOCK2 indicator is displayed below
the local time display.
• OFF : The CLOCK2 indicator does not display.
CLOCK2 Offset ± 0:00
Sets the desired off-set time period for CLOCK2
display within –24:00 to +24:00 in 5 minute steps.
CLOCK2 Name UTC
Sets the desired 3-character name for CLOCK2.
Capital letters, small letters, numerals, some
symbols (! # $ % & ¥ ? " ’ ` ^ + – ✱ ⁄ . , : ; = < > ( ) [ ] {
} ¦ _
–
@) and spaces can be used.
z Push [EDIT] (F-5) to select the name edit condition.
• The cursor under the 1st character blinks.
x Push [ABC]/[abc] (MF6) or [123]/[Symbol]
(MF7) to select the character group, then rotate
the main dial to select the character.
•
Push [ABC] or [abc] to toggle capital and small letters.
•
Push [123] or [Symbol] to toggle numerals and symbols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to input a space.
• Pushing the transceiver’s keypad, [0]–[9] and [.] can
also enter numerals.
c Push [EXIT/SET] to set the name.
F-1 F-2 F-4
F-6
EXIT/SET
Main dial
SET
TIME
CLOCK
/
To Next Page
Loading...
