Icom IC-7600

Level set mode (Continued) ■
CW RX HPF/LPF – – – – – – –
Sets the high-pass filter (100 to 2000 Hz) and low-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in the CW mode. (default: OFF)
RTTY RX HPF/LPF – – – – – – –
Sets the high-pass filter (100 to 2000 Hz) and low-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in the RTTY mode. (default: OFF)
PSK RX HPF/LPF – – – – – – –
Sets the high-pass filter (100 to 2000 Hz) and low-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in the PSK mode. (default: OFF)
SSB TX Tone (Bass) 0
Sets the bass level of the transmit audio tone in the
SSB mode from –5 to +5. (default: 0)
SSB TX Tone (Treble) 0
Sets the treble level of the transmit audio tone in the
SSB mode from –5 to +5. (default: 0)
AM TX Tone (Bass) 0
Sets the bass level of the transmit audio tone in the
AM mode from –5 to +5. (default: 0)
AM TX Tone (Treble) 0
Sets the treble level of the transmit audio tone in the
AM mode from –5 to +5. (default: 0)
FM TX Tone (Bass) 0
Sets the bass level of the transmit audio tone in the
FM mode from –5 to +5. (default: 0)
FM TX Tone (Treble) 0
Sets the treble level of the transmit audio tone in the
FM mode from –5 to +5. (default: 0)
129
10
SET MODE