Icom IC-7600

56
4
RECEIVE AND TRANSMIT
4
RTTY TX USOS ON
Explicitly inserts the FIGS character, even though it
is not required by the receiving station.
• ON : Inserts FIGS.
• OFF : Does not insert FIGS.
RTTY Auto CR+LF by TX ON
Selects the automatic new line code (CR+LF)
transmission capability.
• ON : Transmits CR+LF code once.
• OFF : Transmits no CR+LF code.
RTTY Time Stamp ON
Turn the time stamp (date, transmission or reception
time) indication ON or OFF.
• ON : Displays the time stamp.
• OFF : No time stamp indication.
RTTY Time Stamp (Time) Local
Selects the clock indication for time stamp usage.
NOTE: The time won’t be displayed when “OFF” is
selected in “RTTY Time Stamp,” as explained above.
• Local : Selects the time that is set in “Time (Now).”
• UTC* : Selects the time that is set in “CLOCK2.”
* The name of choice may differ, according
to “CLOCK2 Name” setting (p. 123). “UTC”
is the default name of CLOCK2.
RTTY Time Stamp (Frequency) OFF
Selects the operating frequency display for time
stamp usage.
NOTE: The frequency won’t be displayed when “OFF”
is selected in “RTTY Time Stamp,” as explained above.
• ON : Displays the operating frequency.
• OFF : No operating frequency display.
RTTY Font Color (Receive) 128 255 128
Set the text color for received characters.
• The color is set in RGB format.
• The set color is shown in the box beside the RGB
scale.
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
RTTY Font Color (Transmit) 255 106 106
Set the text color for transmitted characters.
• The color is set in RGB format.
• The set color is shown in the box beside the RGB
scale.
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
RTTY Font Color (Time Stamp) 0 155 189
Set the text color for time stamp indication.
• The color is set in RGB format.
• The set color is shown in the box beside the RGB
scale.
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
RTTY Font Color (TX Buffer) 255 255 255
Set the text color in the TX buffer screen.
• The color is set in RGB format.
• The set color is shown in the box beside the RGB
scale.
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.