129
12
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Busy LED (BUSY)
The TX/RX indicator lights green while receiving a signal or
when the squelch is open. This indication can be turned OFF
to conserve the battery power, if desired.
• OFF : The indicator does not function even if a signal is
received.
• ON : The indicator lights green while receiving a signal
or when the squelch is open.
(default)
D LCD contrast (CONT)
The contrast of the LCD can be selected from 4 levels.
• 1
(Low contrast) to 4 (High contrast) (default: 3)
High contrast (4)
Default (3)
D Scan name (SCAN N)
The programmed scan, programmed link scan or bank name
is displayed during the scan type selection.
• OFF : The programmed scan, programmed link scan or
bank name is not displayed.
• ON : The programmed scan, programmed link scan or
bank name is displayed.
(default)
D Opening message (OPN.MSG)
The opening message indication that is displayed at power
ON is selectable from Icom logo, my call sign or skipped.
• OFF : Opening message indication is skipped.
• LOGO : Icom logo is displayed at power ON.
(default)
• CALL : The set my call sign is displayed at power ON.
When LOGO is selected When Call sign is selected
To Next Page
Loading...
