163
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
• BP-216 BATTERY CASE
Battery case for LR6 (AA) × 2 alkaline batteries.
• BP-217 LI-ION BATTERY PAC K
7.4 V/1500 mAh (Min.)/1580 mAh (Typ.) Lithium Ion battery
pack. Battery life: 6.5 hrs. (approx.; VHF, FM, high power, Tx :
Rx : Standby = 1:1:8)
• BC-167ND BATTERY CHARGER
For regular charging of battery packs. Charging time : Max. 6
hrs.
• BC-139 DESKTOP CHARGER+BC-123E AC ADAPTER
Rapidly charges BP-217 LI-ION BATTERY PAC K in approx. 2.5 hrs.
• HM-189GPS GPS SPEAKER-MICROPHONE
Allows you to operate in rainy condition; includes GPS receiver
and antenna.
• HM-75A REMOTE CONTROL SPEAKER MICROPHONE
Allows you to remotely select operating channels, etc.
• HM-131 SPEAKER-MICROPHONE
For operation while conveniently hanging the transceiver from
your belt, etc.
• HM-153/HM-166 EARPHONE-MICROPHONE
Ideal for hands-free operation: clip the HM-153/HM-166 (with
integrated PTT switch) to your lapel or breast pocket. Allows
you to operate in rainy condition.
• HS-85 HEADSET WITH VOX/PTT UNIT
Hands-free headset with VOX control box.
• SP-13 EARPHONE
Provides clear audio in noisy environments.
• CP-12L
CIGARETTE LIGHTER CABLE WITH NOISE FILTER
• CP-19R
CIGARETTE LIGHTER CABLE WITH DC-DC CONVERTER
Allows you to operate the transceiver through a 12 V cigarette
lighter socket. You can also charge the attached battery pack
(during stand-by only).
CP-19R: A built-in DC-DC converter provides an 11 V DC output.
• OPC-254L DC POWER CABLE
For operation and charging via an external power supply.
• OPC-474 CLONING CABLE
Used for handheld-to-handheld cloning.
• OPC-478/478UC CLONING CABLE
Used for data cloning between transceiver and PC with
CS-80/880 (free download software).
• OPC-1529R DATA COMMUNICATION CABLE
Allows low-speed data communication in DV mode, data clon-
ing operation with CS-80/880 (free download software) or GPS
operation with GPS receiver.
• MB-86 SWIBEL BELT CLIP
Swivel belt clip is useful for easy attaching/detaching the trans-
ceiver to/from the belt.
• LC-163 CARRYING CASE
Helps protect the transceiver from scratches, etc.
• AD-92SMA ANTENNA CONNECTOR ADAPTER
Allows you to connect an external antenna with a BNC con-
nector.
• CS-80/880 CLONING SOFTWARE (free download)
Use this software to program settings such as memory chan-
nels and set mode contents quickly and easily via your PC’s
RS-232C terminal (using OPC-1529R or OPC-478), or USB
port (OPC-478UC). Either OPC-1529R, OPC-478 or OPC-
478UC is required.
16
OPTIONS
To Next Page
Loading...
