Icom IC-E80D - Optional HM-75 A; Remote Control Speaker Microphone

164
16
OPTIONS
The optional HM-75A allows you to remotely select operat-
ing frequencies, memory channels, etc.
Remote control functions can be selected from 3 settings.
These can be selected with “MIC” in FUNC set mode (SET).
MENU ¶ SET ¶ FUNC ¶ MIC
(p. 127)
(Push [MENU ]), (Push [](2)/[](8), then push [ ](5).)
A
B
Speaker
Earphone jack
PTT switch
OFF
ON
LOCK
Transmit LED
Microphone
The HM-75A has a lock switch on the backside to prevent
accidental frequency changes, etc.
Be sure to turn power OFF when plugging/unplugging the
HM-75A to/from the [SP/MIC] jack.
• NORM-1: (default)
[A] Selects band.
[B] Toggles the VFO mode and memory mode.
[
Y] Frequency or memory channel “UP.”
[
Z] Frequency or memory channel “DOWN.”
• NORM-2:
[A] Toggles the monitor function.
[B] Toggles the VFO mode and memory mode.
[
Y] Frequency or memory channel “UP.”
[
Z] Frequency or memory channel “DOWN.”
• SIMPLE:
[A] Toggles the monitor function.
[B] Selects call channel.
[
Y] Selects memory channel 0 in memory mode.
[
Z] Selects memory channel 1 in memory mode.
SIMPLE mode can select only 3 channels and is useful for
group operations during touring, etc.
The VFO mode cannot be selected via the microphone
when SIMPLE mode is selected.
N Optional HM-75A REMOTE CONTROL SPEAKER MICROPHONE