N DV set mode items (DV SET)
D Auto reply (REPLY)
Use this function to reply to a station calling when you are
away from the transceiver.
After a manual transmission (pushing [PTT]), the Auto Reply
setting returns to OFF automatically.
• OFF : No reply is performed even if a call is received.
(default)
• ON : Sets the caller's call sign and replies to the call
with the programmed own call sign.
NOTE: When Auto reply is “ON,” the power save function
(p. 125) is disabled to receive call sign signal properly.
D DV data TX (DATATX)
During low-speed data operation, auto data transmission
function is available. This function activates to transmit auto-
matically when the PC software sends data to the IC-E80D
via the [DATA] jack.
(default: PTT)
• PTT : Data from [DATA] transmits when [PTT] is
pushed. (default)
• AUTO : Data from [DATA] transmits automatically.
D Digital monitor (D MONI)
Sets the desired monitoring mode during digital mode opera-
tion from “Auto,” “Digital” and “Analog.”
• AUTO :
The transceiver sets monitoring mode to FM and
DV according to the received signal.
(default)
• DIGI : Monitors in DV mode.
• ANALOG : Monitors in FM mode.
132
12
MENU SCREEN OPERATION
To Next Page
Loading...
Need help?
General
